Inertial Aerosystems

+44 (0) 203 258 0023
info@etlg.co.uk

Latest News

MEMS Variable Capacitive Accelerometers
28 September 2017

Model 820 Shallow Water
10 August 2017

A Family of UAV Autopilots
23 May 2017

HG4930 6DOF IMU
05 April 2017

HG1120 9 DOF IMU
09 March 2017

Synchro/Resolver multichannel I/O cards on Compact PCi, Compact PCI-Express and XMC
10 August 2016

LCF-300 inclinometer
14 June 2016

CPe-4000 series
26 February 2016

New Geophysical/Geotechnical Tiltmeter
08 February 2016

Tiltmeter with digital Internet output
18 January 2016

Micro HMR3601 Compass
20 October 2015

GG1320AN Digital Ring Laser Gyroscope
14 September 2015

Jewell Emerald Series inclinometer
25 August 2015

Impact Testing Accelerometer System From ETLG Inertial Aerosystems
08 April 2015

ETLG Announces Platform Tiltmeters
10 February 2015

Guide to choosing a suitable gyroscope
08 December 2014

Next generation Surface Mount MEMS accelerometers
09 October 2014

Honeywell Digital Compass Module HMC6343
29 May 2014

New Inclinometers from ELTG Inertial Aerosystems
12 March 2014

NEW DIGITAL INCLINOMETER
11 March 2014


 

VN-200



ETLG Inertial Aerosystems introduces the VN-200, a miniature, high performance GPS-Aided Inertial Navigation System (GPS/INS) that combines MEMS inertial sensors, a high-sensitivity GPS receiver, and advanced Kalman filtering algorithms to provide optimal estimates of position, velocity, and attitude.

 The VN-200 was the first GPS-Aided Inertial Navigation System (GPS/INS) in a single surface mount package. At the size of a postage stamp, the VN-200 SMD requires only a single 3.2-5.5V power supply, and can be directly embedded into a user’s electronics. Interface with the VN-200 SMD is made easy by using either the serial 3V TTL (UART) or the Serial Peripheral Interface (SPI).

The VN-200 is available in two different packaging options: the surface mount device (SMD) and the “Rugged” module.

The VN-200 incorporates an onboard high sensitivity 50-channel u-blox GPS receiver. A U.FL (VN-200 SMD) or MMCX (VN-200 Rugged) connector is provided for connection to an external active GPS antenna.

Utilizing the latest advancements in MEMS technology, the VN-200 incorporates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and a barometric pressure sensor. The highest performance is achieved, by eliminating common error sources such as sensitivity to supply voltage variations and temperature dependent hysteresis. Each VN-200 is individually tested and characterized over the full operating temperature range to determine the bias, sensitivity and cross-axis alignment for each individual sensor. Calibration coefficients are stored on the sensor and are fully temperature compensated in real-time.

For further information contact Ph 44(0)203 258 0023, E: sales@etlg.co.uk


11 October 2017